Industrial Storage Systems Tailored for Iraqi Warehouses
From seismic-resistant pallet racks designed for seismic zones in Kurdistan to heavy structural cantilever columns supporting oilfield drilling tubulars in Basra, explore our precision-formed cold-rolled steel rack systems.
Garage Warehouse Rack Adjustable Storage Stacking Racks Shelves
- Load Capacity: 500 - 1,500 kg/level
- Material: High Tensile Q235B Steel
- Pitch Adjustment: 50mm / 75mm Increments
- Ideal Regional Use: Baghdad Retail Backstores
Industrial Drive-In Steel Racking System with Corrosion Protection
- Pallet Density: Up to 80% Space Utilization
- Configuration: FILO / FIFO Cold Chain
- Coating: Epoxy Thermosetting Powder
- Ideal Regional Use: Erbil Food & Beverage Hubs
3000KG Custom Steel Deck Storage Rack for Parts & Plastic Bins
- Decking Type: Solid / Perforated Steel Deck
- Beam Section: Heavy Box Beam with Safety Pins
- Safety Factor: 1.5 Safety Design Margin
- Ideal Regional Use: Automotive Spares in Sulaymaniyah
Selective Pallet Rack with Waterfall Wire Mesh Decking System
- Wire Gauge: 4.5mm - 6.0mm Carbon Steel
- Sprinkler Flow: Over 70% Open Area
- Finish: Hot-Dip Galvanized / Powder Coated
- Ideal Regional Use: Basra Chemical & FMCG Depot
Two-Level Prefabricated Warehouse Mezzanine Shelving Platform
- Floor Loading: 300 - 1,000 kg/m²
- Structure: Rack-Supported Modular Steel
- Vertical Access: Integrated Stairs & Pallet Gates
- Ideal Regional Use: Baghdad Industrial Zone Picking
Industrial Steel Cantilever Racking for Oil Pipes & Tubing
- Arm Capacity: 500kg - 1,800kg Per Arm
- Column Heights: Up to 9,000 mm Engineered
- Base Layout: Single or Double-Sided Base
- Ideal Regional Use: North Rumaila Oilfield Supply Bases
Victory Heavy-Duty Cantilever Racking for Building Materials
- Design Load: Up to 5,000 kg Column Unit
- Tapered Arms: Deflection Compensated Design
- Finish: Anti-Corrosive Outdoor Zinc Coat
- Ideal Regional Use: Mosul Reconstruction Stockyards
Heavy-Duty VNA & Drive-In Adjustable Warehouse Racking System
- Aisle Width: 1,600mm - 1,800mm VNA Path
- Frame Profiles: 100mm, 120mm Omega Sections
- Corrosion Test: 500-Hr Neutral Salt Spray Proof
- Ideal Regional Use: Umm Qasr Port Bonded Warehousing
25+ Years
Manufacturing Heritage (Since 2001)
30,000 m²
Automated Production Facility
30,000 Tons
Monthly Processing Capacity
10,000+
Projects Shipped Worldwide
Engineering Heavy Duty Racks for Iraq’s Severe Operating Conditions
Deploying intralogistics racking in the Republic of Iraq requires specific structural and chemical engineering adaptations to withstand ambient thermal extremes exceeding 52°C, abrasive sandstorm exposure, and northern seismic activity.
Thermal Expansion & High-Heat Coating Metallurgy
Southern and central Iraqi regions (Basra, Nasiriyah, Baghdad) experience sustained summer surface temperatures inside non-insulated metal warehouses exceeding 60°C. Standard commercial paint quickly micro-cracks, bubbles, and flakes under intense heat and UV penetration.
Guangzhou Heda Shelves applies an automated continuous 8-stage pre-treatment featuring chemical pickling and deep zinc-phosphating, topped by an electrostatic thermosetting architectural polyester powder coating baked at 195°C. This maintains elasticity and eliminates coating delamination during wide thermal cycling.
- Thermal expansion engineered beam connect clips
- RoHS compliant, non-toxic powder chemistry
- No embrittlement under continuous high ambient heat
Shamal Dust Storm & Abrasive Particulate Defense
The north-westerly Shamal winds carry fine silica sand and airborne particulates into storage sheds across the Mesopotamian plain. Fine dust deposits inside open structural profiles, absorbing humidity and initiating crevice corrosion under standard roll-formed metal edges.
Our upright profiles utilize closed multi-bend 11-fold Omega (Ω) geometry. Upright columns and horizontal diagonal bracings are cold-punched with high-precision tooling to minimize microscopic burrs, ensuring complete powder-coat wrap over all edges and preventing mechanical abrasion wear.
- Zero-pocket profile design to reduce dust accumulation
- Galvanized baseplates with dust deflection angles
- 500-hour neutral salt-spray ASTM B117 compliance
Seismic Engineering for Kurdistan & Northern Terranes
Northern Iraq, including Erbil, Sulaymaniyah, and Dohuk, lies directly along the active Zagros-Taurus fold-and-thrust belt. Racking systems erected in this corridor must withstand lateral acceleration forces to avoid progressive collapse under dynamic seismic loading.
Heda Shelves designs its high-bay frame profiles in strict compliance with EN 15512:2020 and RMI (Rack Manufacturers Institute) MH16.1. We reinforce column baseplates, embed high-tensile chemical wedge anchors into C25/30 concrete slabs, and integrate cross-bay spine bracing.
- FEA software verified dynamic horizontal displacement
- Seismic safety pins with 18kN shearing resistance
- Structural engineering calculations for civil permits
| Structural Parameter | Heda Shelves Iraq Specification | Common Low-Tier Importers | Iraqi Warehouse Benefit |
|---|---|---|---|
| Steel Grade Standard | Certified Q235B & Q355B (Yield Strength: 235 - 355 MPa) | Scrap-blend uncertified mild steel (<195 MPa) | Guarantees rated payload without plastic deformation |
| Upright Forming Profile | Continuous Cold Roll-Formed 11-Fold Omega Section | Simple 5-fold or 7-fold open channels | Resists forklift side impact and column buckling |
| Pre-Treatment Wash | Automated 8-Stage Spray Degreasing + Zinc Phosphating | Manual solvent wipe or single water rinse | Powder coating will not blister under 50°C Iraqi summer |
| Coating Thickness | 75 - 100 μm Electrostatic Thermoset Polymer | 35 - 50 μm rapid lacquer application | Protects against abrasive silica dust and sea-air corrosion |
| Seismic Footing & Anchoring | Heavy M12-M16 High Shear Chemical/Mechanical Studs | Lightweight drop-in sleeve expanding anchors | Full structural stability in seismic zones 2 and 3 |
Strategic Storage Application Scenarios Across Iraq’s Hubs
Industrial demand across Iraq is diverse. Our modular warehouse solutions are customized for three core economic corridors powering the nation's revitalization.
1. Basra Oilfield Logistics, Khor Al Zubair & Umm Qasr Port
As the epicenter of Iraq's petrochemical wealth, the Basra Governorate—encompassing North and South Rumaila, West Qurna, and Majnoon—requires heavy-duty, high-integrity racking systems. Oilfield logistics support contractors need to stage heavy rotary drill bits, blowout preventers (BOPs), valves, and long casing pipes.
For these oil and gas supply bases, Heda Shelves supplies Heavy-Duty Cantilever Racking (up to 1,800 kg per arm) with removable steel stop-pins, alongside structural steel shelving integrated with wire mesh waterfall decking for fire compliance under international EPC operating mandates.
"Our project engineers verify beam loading ratios under ASTM standards to comply with safety audits from Shell, BP, and TotalEnergies operating across southern Iraqi fields."
2. Greater Baghdad Wholesale, E-Commerce & Pharmaceutical Storage
Home to over 7 million consumers, Baghdad (spanning Al-Karkh, Al-Rusafa, and Jamila Wholesale Market) is undergoing an intralogistics modernization push. Warehouses are shifting from floor stacking to vertical storage systems to optimize high land lease rates and improve picking speeds.
In pharmaceutical and FMCG distribution centers, we implement Rack-Supported Multi-Tier Mezzanines and Selective Pallet Racking. These double or triple usable floor square meters without costly civil construction expansions, giving operators immediate 100% pallet accessibility for high-throughput SKU rotation.
"HEDA’s modular mezzanines let Baghdad distributors consolidate manual carton-picking tiers above palletized bulk storage, optimizing SKU turnaround cycles by 40%."
Key Trends Transforming Iraq's Warehousing Landscape
Iraq is executing large infrastructure and trade projects. Supply chain directors must evaluate how these macro developments impact warehouse rack procurement.
The Iraq Development Road Project (Tariq al-Tanmiya)
The $17-billion, 1,200 km highway and rail corridor connecting Grand Faw Port in Basra to the Turkish border will establish Iraq as a transcontinental trade bridge between Asia and Europe.
This megaproject is accelerating the construction of logistics dry ports and bonded container freight stations in Basra, Diwaniyah, Baghdad, and Nineveh. Warehouses along this corridor demand standardized, heavy-duty adjustable pallet systems capable of handling universal European (1200x800mm) and ISO standard (1200x1000mm) pallets.
- Cross-docking high-throughput pallet configurations
- Multi-depth drive-in systems for customs bonded transit
Cold Chain Upgrades for Food Security & Pharmaceuticals
Iraq imports over 80% of its processed food, fresh dairy, and medical supplies. Government health ministries and private logistics consortiums are actively investing in temperature-controlled warehouses to eliminate spoilage losses caused by extreme summer heat.
Because refrigerating warehouse space is energy-intensive, chilled and sub-zero cold rooms require dense storage. Our High-Density Drive-In Racks and Semi-Automated Radio Shuttle Systems eliminate forklift access aisles, cutting chilled air volume requirements by up to 50%.
- Optimized cold cubic storage footprint reduces cooling load
- Cold-resistant steel alloys prevent sub-zero brittle fracture
Shift from Unorganized Floor Stacking to High-Bay Density
Historically, Iraqi commercial stockyards relied on wooden pallet ground stacking. This damaged bottom cargo cartons, wasted vertical air rights, and limited inventory accuracy under manual counts.
Modern third-party logistics (3PL) operators in Erbil and Baghdad are deploying 8 to 12-meter high-bay racking systems managed by Warehouse Management Systems (WMS). This transition delivers full SKU traceability, cuts forklift loading times, and triples storage density within the same building footprint.
- 100% individual pallet selectivity minimizes product loss
- Standardized rack bays fit both reach trucks and counterbalances
Why Middle East Buyers Partner with Guangzhou Heda Shelves
Founded in 2001, Guangzhou Heda Shelves Co., Ltd. has grown from a regional manufacturing workshop into an internationally certified intralogistics exporter, providing engineered racking systems to clients in over 120 countries.
Direct Manufacturing Control (No Trading Middlemen)
Unlike export agents and trading intermediaries, Heda Shelves controls every step of production across our 30,000 square meter plant in Guangzhou. We purchase prime steel coils directly from tier-1 Chinese mills (Baosteel and Shougang Group) with complete mill test certificates (MTC).
In-house manufacturing covers precision slitting, continuous automated roll-forming, CNC punching, robotic welding, pre-treatment phosphating, and powder coating lines. This single-roof production gives Iraqi buyers consistent metallurgical tolerances, predictable delivery lead times, and factory-direct pricing.
- Over 30,000 metric tons of monthly processing capacity
- Full traceability from raw steel coils to packed racking bundles
Complimentary 2D CAD & 3D Photorealistic Layout Engineering
Warehouse planners in Iraq do not need to guess beam spans, aisle clearances, or building column interferences. Our engineering team provides detailed 2D CAD floor layouts, complete 3D photorealistic renderings, and structural beam deflection checks within 24 to 48 hours—free of charge.
We model turning radiuses for your specific forklift fleet (counterbalance, reach truck, or VNA turret man-up), calculate beam deflection ratios under FEM 10.2.02 codes, and provide floor anchor loading schemes ready for submission to local Iraqi municipal building authorities.
- Clear aisle optimization according to ISO handling standards
- 3D visualization files provided for internal stakeholder approval
International Certifications: CE, ISO 9001:2015 & RoHS
International tenders, oilfield service subcontracts, and multi-national logistics bids in Iraq require verified third-party quality certifications. We provide full compliance documentation for technical audit submissions.
Our quality management and structural safety systems are certified under:
- CE Certification: No. 2435-CPR-8605159 (Structural components for building works)
- ISO 9001:2015: Certificate No. 18624Q00169R0M
- RoHS Directive: Heavy-metal-free, environmentally safe powder coating surfaces
- Full cooperation with SGS, Bureau Veritas (BV), and TÜV pre-shipment inspections
Navigating Iraq Shipping Logistics, COSQC & Port Clearance
Importing heavy steel structures into federal Iraq or the Kurdistan Region requires precise logistical routing and compliance documentation. Review our practical guide for shipping from South China ports.
1. Strategic Port Routing: Umm Qasr vs. Mersin Corridor
Depending on your final project destination within Iraq, choosing the correct maritime transit route can save thousands of dollars in overland haulage:
For Basra, Baghdad & Central/Southern Iraq: We book direct ocean container shipments from Guangzhou (Nansha) or Shenzhen (Yantian/Shekou) directly to Umm Qasr Port (North and South Terminals). Average ocean transit time is 22 to 28 days via Arabian Gulf feeder networks.
For Erbil, Sulaymaniyah & Kurdistan Region (KRG): Shipments can either transit Umm Qasr with bonded cross-country transport or discharge at Mersin Port (Turkey), moving overland through the Ibrahim Khalil border crossing under bonded transit clearance.
2. Iraqi Customs, COSQC & Pre-Shipment Inspection (VOC)
Iraq enforces strict compliance via the Central Organization for Standardization and Quality Control (COSQC). Failure to supply authenticated certificates results in demurrage fines and port impoundment.
Heda Shelves works directly with mandated inspection bodies (Bureau Veritas, TÜV Rheinland, or SGS) to issue the required Certificate of Conformity (CoC / CoI) in China prior to container vessel departure.
We provide verified Commercial Invoices and Certificates of Origin (CO) authenticated by the China Council for the Promotion of International Trade (CCPIT) and the Iraqi Embassy in China when required by your clearing bank.
3. Container Loading Optimization & Anti-Damage Packaging
Structural steel components are heavy and high-volume. Poor container stuffing wastes cubic container capacity and risks in-transit impact damage from sea movement.
Our logistics team builds customized 3D container packing layouts. Long upright frames (up to 11.8 meters) are packed into 40ft High Cube (40HC) containers using specialized protective edge-wrapping, high-strength polyester strapping, and steel Dunnage blocks.
Beams, row spacers, base plates, and hardware bolts are packaged in palletized, color-coded crates matching the engineering installation drawings, allowing easy unloading via standard counterbalanced forklifts in Iraq.
Frequently Asked Questions by Iraqi Warehouse Buyers
Everything your procurement committee, engineering team, and logistics manager need to know before issuing a purchase order to China.
Q1: How does Heda Shelves assist with customs clearance at Umm Qasr Port?
We supply a full export documentation pack: Bill of Lading (B/L), CCPIT-certified Commercial Invoice, Packing List with component weights and container itemization, Certificate of Origin (CO), and the mandatory Certificate of Conformity (CoC/VOC) issued by authorized third parties (such as BV or TÜV) to guarantee clearance under Iraqi customs regulations.
Q2: Can your racking systems handle non-standard pallet sizes used in Iraq?
Yes. While European pallets (1200 x 800 mm) and standard industrial pallets (1200 x 1000 mm) are common, many Iraqi importers handle custom wooden skids for building hardware or drums. Because we manufacture every beam and frame from raw steel coils, we customize clear beam lengths (e.g., 2300mm, 2700mm, 3300mm, 3900mm) and frame depths (800mm to 1200mm) to match your exact inventory dimensions.
Q3: How do your racking systems prevent corrosion in Basra's salty, humid conditions?
Basra's proximity to the Arabian Gulf creates an environment with high humidity and airborne marine salts. For standard dry warehouses, our automated 8-stage chemical pickling and zinc-phosphating pre-treatment ensures powder coating adhesion without rust creep. For coastal, outdoor, or open-sided sheds, we offer hot-dip galvanized uprights and beams with zinc coatings meeting ISO 1461 standards.
Q4: Do you provide installation engineers or onsite guidance in Iraq?
Every order includes detailed 2D layout drawings, 3D exploded assembly diagrams, and step-by-step video installation guides. Components are pre-drilled and bolt-together for easy assembly. For major logistics distribution hubs or multi-tier mezzanine installations in Baghdad, Basra, or Erbil, we can provide remote video engineering support or dispatch experienced bilingual installation supervisors to direct your local Iraqi labor teams.
Q5: What are the standard production lead times and ocean transit times to Iraq?
Standard production for a 1-to-5 container project (approx. 50 to 120 metric tons) is typically 15 to 20 working days from drawing confirmation. Ocean transit from Guangzhou or Shenzhen ports directly to Umm Qasr Port takes approximately 22 to 28 days. For northern projects via Mersin, transit takes approximately 25 to 30 days plus overland trucking across the border.
Q6: What international commercial payment terms do you accept for Iraqi contracts?
We accommodate standard global trade payment terms, including Telegraphic Transfer (T/T: 30% deposit with the 70% balance payable upon presentation of original shipping Bill of Lading copies) as well as Irrevocable Letters of Credit (L/C at Sight) issued by reputable international banks or confirmed through tier-1 financial institutions in Dubai or Amman.
Plan Your Warehouse Storage Layout with Our Engineering Team
Send us your warehouse dimensions, building column locations, pallet weights, and forklift specifications. Our engineering team will deliver a customized 2D CAD floor plan, 3D visualization model, and detailed price quotation within 24 to 48 hours.
Direct Factory Communication • Free 2D/3D Warehouse Drawings • Verified CE & ISO 9001:2015 Manufacturing Quality